Eco-friendly tape casting of borosilicate glass/Al2O3 sheets for LTCC applications

This work reports the innovative development of a borosilicate glass/Al₂O₃ tape for LTCC applications using an eco-friendly aqueous tape casting slurry. Polyvinylpyrrolidone (PVP) and polyacrylic acid (PAA) were the respective dispersants, while carboxymethyl cellulose (CMC) and styrene acrylic emulsion (SA) were the respective binders. The results showed that PVP was more suitable than PAA as the dispersant for the aqueous casting slurry, and that 1.5 wt% PVP would achieve well dispersion of CABS glass/Al₂O₃ powder in the aqueous slurry. Moreover, a small amount of 2.0 wt% CMC binder could yield smooth CABS glass/Al₂O₃ tapes crack free. A high-quality CABS glass/Al₂O₃ tape with a smooth surface was made from an aqueous slurry containing 1.5 wt% PVP dispersant, 2.0 wt% CMC binder, and 2.0 wt% PEG-400 plasticizer. The density, tensile strength, and surface roughness of the green tape were 2.05 g/cm³, 0.87 MPa, and 148 nm, respectively. The resulting CABS glass/Al₂O₃ composites sintered at 875 °C exhibited a bulk density of 3.14 g/cm³, a dielectric constant of 8.09, a dielectric loss of 1.0 × 10^?3, a flexural strength of 213 MPa, a thermal expansion coefficient of 5.30 ppm/^°C, and a thermal conductivity of 3.2 W m^?1 K^?1, thus demonstrating its broad prospects in LTCC applications.     

Resolving Deep Sub-Wavelength Scattering of Nanoscale Sidewalls Using Parametric Microscopy

The quantitative optical measurement of deep sub-wavelength features with sub-nanometer sensitivity addresses the measurement challenge in the semiconductor fabrication process. Optical scatterings from the sidewalls of patterned devices reveal abundant structural and material information. We demonstrated a parametric indirect microscopic imaging (PIMI) technique that enables recovery of the profile of wavelength-scale objects with deep sub-wavelength resolution, based on measuring and filtering the variations of far-field scattering intensities when the illumination was modulated. The finite-difference time-domain (FDTD) numerical simulation was performed, and the experimental results were compared with atomic force microscopic (AFM) images to verify the resolution improvement achieved with PIMI. This work may provide a new approach to exploring the detailed structure and material properties of sidewalls and edges in semiconductor-patterned devices with enhanced contrast and resolution, compared with using the conventional optical microscopy, while retaining its advantage of a wide field of view and relatively low cost.     

原油及馏分油脱酸技术进展

石油酸是原油和馏分油中普遍存在的腐蚀性物质，其主要成分为环烷酸并且含量可以高达90%以上。环烷酸具有羧酸的所有化学性质，所以常常造成严重的腐蚀，从而影响原油加工设备及油品使用设备的正常运行和使用寿命。随着近年来世界范围内高酸原油产量的逐渐增加，高原油及各种高酸值馏分油所带来的腐蚀与产品质量问题显得愈发严重，因此迫切需要开发出经济高效的脱酸技术与工艺路线。本文较为全面而详细地总结并评述了国内外原油及油品的各种脱酸技术方法。分析表明：目前所报道的各类脱酸工艺较多，其中工业应用的加氢脱酸效果虽好但是成本较高，而其他大多数脱酸方法都存在较多的缺点或不足，因此探寻一种绿色环保、经济高效并且具有较好普适性的油品脱酸工艺显得非常迫切而必要。酯化法脱酸具有加工工艺简单、不需要复杂的后继处理，几乎可以降低所有的高酸值原油和油品（轻质、重质馏分油以及渣油）的酸值，为原料油的进一步加工提供了方便。酯化脱酸工艺的关键在于高效催化剂的选择，而目前的催化酯化体系虽然脱酸率较高，但仍存在着反应时间较长的不足，相信通过反应过程强化等手段解决该问题以后，催化酯化脱酸工艺会被很快投入到原油及油品的脱酸实际工业生产中去。     

ZnSe/CoSe/NCDPH composites as anode materials for lithium ion batteries with high capacity and long cycle

In this paper, dopamine hydrochloride (DPH) is introduced to synthesize ZIF-8@ZIF-67@DPH in the preparation of ZIF-8@ZIF-67. ZnSe/CoSe/NC_DPH (N-doped carbon) composites are calcined in a high-temperature inert atmosphere with ZIF-8@ZIF-67@DPH as the precursor, selenium powder as the selenium source. ZnSe/CoSe/NC_DPH has high discharge specific capacity, good cycle stability and outstanding rate performance. The first discharge capacity of ZnSe/CoSe/NC_DPH is 1616.6 mAh g⁻¹ at the current density of 0.1 A g⁻¹, and the reversible capacity remains at 1214.2 mAh g⁻¹ after 100 cycles, the reversible capacity is 416.7 mAh g⁻¹ after 1000 cycles at 1 A g⁻¹. Therefore, ZnSe/CoSe/NC_DPH composites provide a new step for the research and synthesis of new stable, high-capacity, and safe high-performance lithium ion batteries. The bimetallic selenide composites not only have bimetallic active sites, but also can form synergistic effect between different metal phases, which can effectively reduce the capacity attenuation caused by volume expansion and reactive stress enrichment during lithium storage of metal oxide anode materials. Meanwhile, N-doped carbon can improve the conductivity and provide more active sites to store lithium, thus improving its lithium storage capacity.     

基于OH-PLIF的狭长受限空间油气爆炸中间基团浓度分布研究

为了精确测量狭长受限空间油气爆炸过程中的关键自由基团，从而实现对其爆炸流场、火焰传播的精确分析，基于先进的平面激光诱导荧光测量技术（PLIF），设计构建了油气爆炸PLIF测量系统，开展了不同工况下狭长受限空间汽油-空气混合气爆炸实验研究，获得了该爆炸中间基团OH基的浓度分布。实验结果表明，1.1%~2.4%（体积分数）油气浓度之间，OH基浓度先增大后减小；随火焰的传播发展，OH基浓度不断变大，表明爆炸不断强化；爆燃不同时期OH基分布情况不同，表明不同爆燃阶段的燃烧反应区域有较大差异；爆燃前期火焰与壁面之间有“隔离带”，是由未燃气浓度增大导致火焰传播变慢的结果。主要创新点在于通过设计时序控制子系统，解决了非稳态预混燃烧中自由基分布瞬态测量。     

规整有机分子自聚集体对铜的高效缓蚀的研究

通过多步法合成了离子型含双苯并三氮唑环的目标分子，4，4'-{苯-1，3-二基二[(1E)-3-羰基丙-1-烯-1，3-二基]}二[2-(2H-苯并三唑-2-基)苯醇酸]二钾。在室温条件下，目标分子在3.5%（质量）NaCl/DMSO（二甲基亚枫）混合溶液 （体积比：40/60） 中能够发生分子自组装产生纳-微米级的自聚集体。通过傅里叶变换红外光谱 （FT-IR）、拉曼光谱和X射线光电子能谱 （XPS） 的表征，证实了所形成的目标分子自聚集体能够对铜表面产生强烈的化学吸附作用，在铜表面形成自组装膜。利用电化学方法测定了目标分子自聚集体吸附在铜表面形成自组装膜后，在3.5%（质量）NaCl溶液中的缓蚀性能。结果表明目标分子自聚集体在NaCl溶液中能高效地抑制铜腐蚀。     

NH2-MCM-41的改性及其pH响应性释药的研究

采用正硅酸乙酯（TEOS）和3-氨丙基三乙氧基硅烷（APTES）通过共缩聚法合成介孔二氧化硅（MCM-41）。首先对其氨基修饰，再通过有机合成接枝—R基团（—R：—CHO、—OH、—CH₃、—COOH），制备得到Me-Ph-NH-MCM-41、OHC-Ph-NH-MCM-41、HO-Ph-NH-MCM-41、HOOC-Ph-NH-MCM-41四种不同的药物载体。利用FT-IR、Zeta电位、XRD和SEM对其结构和形貌表征，结果表明NH₂-MCM-41改性成功。以罗丹明B（RhB）为模型进行载药性能测试，并考察了此释药系统在模拟不同pH的体液下的敏感释药行为，同时探究了不同—R基团对释药的影响。结果显示，四种载体在中性条件下几乎不发生药物释放，通过改变环境体系pH可以有效控制药物释放，其释药行为可以用Korsmeyer-Peppas动力学模型来描述。实验表明，释药量：RhB@HOOC-Ph-NH-MCM-41>RhB@OHC-Ph-NH-MCM-41>RhB@HO-Ph-NH-MCM-41>RhB@Me-Ph-NH-MCM-41，不同—R基团的药物载体的pH响应性不同，其中RhB@HOOC-Ph-NH-MCM-41释药量在pH=1.2时可达57.87%，在用于药物智能控释材料方面具有一定的应用潜力。     

Investigation of the effects of SPEEK and its clay composite membranes on the performance of Direct Borohydride Fuel Cell

In this study, composite cation exchange membranes (CEM) were developed. With the experience from widely studied proton exchange membrane fuel cells (PEMFC), sulfonated polyether ether ketone (SPEEK) was prepared to be a more effective and cheaper ionomer alternative to the industry standard Nafion ®. SPEEK polymer membrane can reach sufficient ionic conductivities but have some mechanical and chemical stability problems (at a high degree of sulfonations (DS)). Therefore, in order to optimize the membrane, composite mixing with a well-known organic/inorganic clays called Cloisite® 15A, Cloisite ® 30B and MMT were used. Test cells for both single-cell and conductivity were designed and constructed. The ionic conductivity cell was different than the ones used in most studies, measuring conductivity in-plane with 4 probes using EIS. The membranes were characterized for their proton conductivity with electrochemical impedance spectroscopy (EIS), for DS with H NMR, water uptake, and fuel cell performance tests. First results showed that the acidic sulfonic groups of SPEEK interacted with organic/inorganic clays and as a result of partial barrier the ionic conductivity was decreased but power densities were increased. SPEEK-Cloisite® 30B composite membrane has given 40 mW/cm² power density value which is higher than pure SPEEK membrane (35 mW/cm²). The proton conductivities of the final composite membranes were close to bare SPEEK membranes which are 0,065 and 0,075 S/cm for SPEEK-Cloisite ® 30B and pristine SPEEK, respectively.